Category
Plaster of Paris Bandage
Plaster of Paris Bandage applied in layers around an injured limb to construct a stiff cast for immobilizing fractured bones, dislocated joints, or painful sprains. Made from bleached cotton gauze support uniformly impregnated with plaster of natural origin. Upon immersion in lukewarm water (approx. 25°C) for about 5 seconds, the plaster hydrates and sets within 2–5 minutes. Non-sterile, for single use. Can be used with or without stockinette/padding. The final cast is rigid, breathable, and moldable to body contours. Also suitable for making impression molds for orthotics/prosthetics and for decorative/art projects.
- Description
- 参数表
-
Plaster of Paris Bandage
Product Introduction
This Plaster of Paris bandage is made from cotton gauze uniformly coated with fine plaster powder. For orthopedic immobilization of fractures, sprains, and bone/joint conditions. Fast-setting, highly conformable, and economical. Available in multiple widths and lengths. CE, FDA, ISO13485 certified.
Item Details
Material：Cotton gauze + Plaster of Paris powder
Setting Time：Fast setting: 2–5 minutes
Color：White or colored
Available Sizes (Width × Length)：5cm × 2.7m, 7.5cm × 2.7m, 10cm × 2.7m, 12.5cm × 2.7m, 15cm × 2.7m, 20cm × 2.7m
Additional Length Options：3m, 3.6m, 4m, 4.6m, 5m
Packaging：Single roll in waterproof bag
Certification：ISO9001, ISO13485, CE, FDA
Raw Material
Cotton gauze fabric uniformly coated with Plaster of Paris powder (calcium sulfate hemihydrate).
Product Features
- Fast setting – hardens in 2–5 minutes for efficient casting
- High conformability – wet bandage easily moulds to body contours
- Smooth cast finish – fine plaster powder ensures a uniform surface
- Economical – cost-effective traditional casting solution
- Multiple sizes – various widths (5–20cm) and lengths (2.7–5m)
- Waterproof single‑roll packaging – protects from moisture before use
- Long shelf life – 5 years when stored in dry conditions
- Non‑sterile, single patient use – reduces cross‑contamination risk
- CE, FDA, ISO13485 certified – meets international quality standards
Customization
Width, length, color (white or colored), packaging, and private labeling – contact us for details.
Time of Use
- Preparation: Use stockinette and padding/cast padding over the limb before application.
- Soaking: Dip the roll diagonally into lukewarm water (approx. 25°C) for ~5 seconds until bubbling stops.
- Squeezing: Gently squeeze excess water from the roll without wringing.
- Application: Apply the wet bandage in overlapping layers spirally around the limb with even pressure. Do not wrap too tightly.
- Molding: Continuously mold the cast by hand during application to ensure even adhesion and remove air bubbles. Stop molding once setting begins.
- Setting: Allow 2–5 minutes for initial set. Cast becomes weight‑bearing in about 24–48 hours.
- Drying: Keep cast dry and avoid load until fully hardened.
- For single patient use only. Replace with a fresh bandage for new applications. Store unused rolls in sealed, dry conditions.
- Fast setting – hardens in 2–5 minutes for efficient casting
Inquiry
Attention: Please leave your contact information and email, and our professionals will contact you as soon as possible!
Shanghai Trust Medix Co., Ltd.
Contact: Mr He
Tel: +86 16601865166
Contact: Mr Wu
Tel: +86 18351421750
Whatsapp (enzowu)
8618351421750
Address: 5/F, No.14, Lane 199, Jin Yun Road, Jiading District, Shanghai, China